Turn on the power and network cable when you get the camera.
The other end of the cable is connected to the LAN port of the router.
Press and hold the reset button for 3 seconds after one minute of power on.
The reset is successful when you hear a “tick”.
Before adding a camera, make sure the phone is connected to the same router network as the camera
Open the yoosee App to register and log in to your account
One minute after resetting the camera.
Click on +
Select the “Wired Connection” method.
Follow the page prompts and click Next
Select the camera ID to add the binding
After successful camera binding
You can name the camera and mount it on the wall according to your needs.
Failed to add
- Need to verify camera password when adding
Please enter the initial password on the label of the unit
If you are prompted with an incorrect password, please reset the camera and re-add it.
- There is no camera ID to add to the list.
Please make sure that there is no device to be added to the device list on the home page of the app.
Please make sure that your phone and camera are connected to the same router network.
Please make sure that the camera has been reset successfully and entered the pending binding state to try other ways to add.
If you have already added the camera before, please go back to the home page of the app, delete it from the list, and reset the camera to add it again.
If the above operations can not bind successfully, please unplug the network cable and reset the camera.
Plug in the Internet cable to use the camera after successfully binding it via Wi-Fi.
