The package does not include a power drill, hammer, or screwdriver(you need to prepare them yourself).
Camera installation
Choose a location that allows you to capture the desired viewing angle.
The recommended installation height is 8-10ft (2.5-3m) above the ground
Note: During installation, please avoid passing directly under the camera.
Through the bracket to confirm the punching position.
Drill holes
(The hole diameter is about 6mm and the depth is about 30mm)
After the drilling is completed, put the screw sleeves plug in.
Screw the camera bracket to the wall.
After installing the bracket, horizontally put the camera on the bracket and make sure they are firm.
Solar panel installation
Determine the location for installing the solar panels. Please choose a sunny spot on the roof or ground
Just like installing the camera bracket, you need to drill holes, plug expansion sleeves and tighten screws.
Screw the solar panel sub-bracket into the separate solar panel bracket until it is tightened in place.
The recommended installation height is 7-10ft (2.5-3m) above the ground.
After the installation is complete, connect the solar panel to the power supply port of the camera back.
